Makita 2012NB/2 Thicknesser, 220 V, 1650 W, 304 mm Blue Large

Product Information

That said, the Makita may still be a good choice for people with very limited space, or those who want to move it around regularly. Also, if you want a planer that will still work in 20 years, the Makita 2012NB is probably your best bet. The best options by far are the DeWalt DW735X, the Makita 2012NB, and the Cutech/Wahuda Tools 40200HC-CT. The DeWalt DW735X is an excellent choice for those that need to make large cuts in wide materials. Planers offer two types of cutterheads: the traditional straight knife and helical, or spiral, configuration. A straight knife cutterhead contains several blades (two to four are typical), which are often referred to as knives.

Makita 2012NB 240v Portable Planer Thicknesser - FFX

Another useful feature is that the DW735 has a blower dust port, which helps push out chips and reduces the risk of clogging. This also allows you to use the planer without any dust extraction, but it does lead to a giant mess. Certainly not recommended for inside use. Spiral Cutterhead Upgrades

Dust connection port. This directs the sawdust to a collection bag, preventing it from accumulating in your workspace.

Makita Planers | Powertool World

Portability is usually a plus when it comes to power tools. But in the case of planers, portable models aren’t necessarily the best or most appropriate solutions. What's the difference between a jointer and a planer? And why do US and UK woodworkers use completely different names? WEN 6552T vs Craftsman CMEW320 – Cheap benchtop planers comparedLunchbox planers like the Makita move over four smaller gliding poles and two thin spindles. This leads to (relatively) less strength to withstand the pressure from the wood.

MAKITA 15 amp 12-inch Corded Thickness Planer | The Home MAKITA 15 amp 12-inch Corded Thickness Planer | The Home

If you’re in the market for a benchtop planer, and you’re looking to get the very best model money can buy, then you have two main options: The DeWalt DW735 and the Makita 2012NB. Helical models, on the other hand, use rows of small, square-shaped cutters that are affixed via inserts, making them easy to replace when needed. Helical cutterheads add to the cost, but maintain sharp cutting ability for a longer time and also make the job significantly quieter. Body Type The 2012NB also has Makita’s own Interna-Lok automated head clamp system that eliminates snipes for more consistent results.The 20,000 RPM motor spins the cutter-head at a top speed of 10,000 RPM, which is more than adequate for even heavy-duty jobs. My name is Aaron, and thank you for reading my article. As a qualified carpenter, I share some tips here at Bangingtoolbox to help provide better DIY information on the internet. You can save money on lumber by using an Alaskan mill and your best gas husqvarna chainsaw to cut timber slabs.