Tamiya 87089 Airbrush Cleaner 250ml, 87089
About this deal
For cleaning out the brush, after every session, I use Spraycraft or Liquid Reamer cleaner from an aerosol can. I think they are essentially the same product and are quite strong. As a final part of the process, I then spray some tap water through the brush to clear out any remaining cleaner. Paint building up is common with acrylics. Again a brush and some Alcohol or Vallejo Airbrush Cleaner work very well. Just add i am using Vallejo Cleaner. However the best I have found as paint just disappears as you spray it on.
Give it a soak in IPA or metho, or Windex (the clear blue liquid with ammonia in it). If you use Windex, make sure that you wash it out thoroughly, as the ammonia can damage the chrome in the a/b. I just need a dedicated spray room. Mmm flat balcony na Pauline needs it for her plants. Tut what to do what to do I was wondering to see if I could buy some for myself, because then I get the handy bottle with its brush, and the cheaper “cement” from the airbrush cleaner. I’ll be moving for Uni soon, so I will be leaving my leaving my almost empty bottle of extra thin at home, since I can get cement when I get there.I always keep a cotton bud dipped in X-20a handy when spraying Tamiyas and use it to remove the paint build up at the nozzle. After a friend gave me some advice, I've now started using Acetone for both Acrylics and Enamels and it works hundreds... I found that Tamiya Airbrush cleaner is good, but it still tended to leave traces of paint in the sleeve, but the Acetone cleans it up shiny shiny.
Acetone for both Acrylics and Enamels and it works hundreds... the Acetone cleans it up shiny shiny. I have always used the Tamiya Airbrush cleaner from basically when I started using my paint thrower, and also had the issues mentioned above. Best reason to buy Tamiya Extra Cement in the small bottle is for the small bottle & excellent pointed cap brush.
The Iwata Medea airbrush cleaning station is a great for controlling and containing your waste from airbrush cleaner Then I use a cotton wool swab soaked with Vallejo Airbrush cleaner to remove congealed paint in the cup before it gets down into the nozzle.